Rlaarlo Omni Terminator RZ001B-C 1:10 Carbon-Fibre 4WD Brushless RC Monster Truck (RTR)

The Rlaarlo Omni Terminator is a 1:10 carbon-fibre monster truck built around something almost nothing else at this size has: a true central differential. Instead of a fixed shaft splitting power front-to-rear, a proper centre diff lets the axles turn at different speeds — so it turns in properly, puts power down on loose ground, and doesn’t bind on tarmac.

Everything around that centre section is built to match. The chassis uses a geometric double-triangular structure with carbon-fibre support plates, the shock towers are 4mm CNC 7075 aluminium, and the drivetrain runs chromium-steel spiral bevel gears throughout. It ships ready-to-run with a gyro on board and a spare body shell in the box.

Power & Electronics

• Motor — brushless, mounted amidships in the modular power bay
• ESC — brushless electronic speed controller with active cooling fan
• Gyro — built into the carbon-fibre version for markedly better high-speed stability
• Servo — 11 kg metal-gear steering servo driving a dual-crank linkage
• Steering gears — 7075 hardened aluminium for torque and durability
• Battery bay — dual-specification, takes 110×36×30 mm (2200 mAh) or 140×30×45 mm (5000 mAh) packs
• Supplied battery — 3S 11.1V 2200 mAh LiPo with XT60 connector
• Radio — 2.4GHz 6-channel transmitter, 350 m range, 0.1 s response

Chassis & Drivetrain

• Central differential — the world’s first at this small a scale; front, centre and rear diffs all fitted
• Geometric structural design — enclosed triangular centre-diff bracket and support plate form upper and lower opposed triangles for chassis rigidity
• Carbon fibre — support plates on the double A-arms and along the chassis spine
• Shock mounts — 4 mm CNC 7075 aluminium front and rear shock towers
• Gears — metal spur gear with chromium-steel spiral cone drive pinions: smooth, high-torque, low-noise
• Differentials — 1:10-scale gear diffs, four screws to service each end
• Impact protection — full-enclosure front and rear crash structures
• Body — PC shell with a captive body clasp so it can’t be lost
• Modular layout — power, electronics and differential modules lift out separately for maintenance

Dimensions & Performance

• Scale — 1:10
• Drive — full-time 4WD through a central differential
• Battery support — 2S to 3S LiPo
• One-click flip — rights itself from a rollover on the throttle, no need to walk over and pick it up
• Surfaces — dirt, grass, gravel, sand, car parks and tarmac

Who Is This For?

• Experienced bashers who want a centre diff at 1:10 rather than 1:8 money
• Drivers who run mixed surfaces and hate drivetrain bind on tarmac
• Anyone who wants a carbon-fibre, upgrade-friendly platform out of the box

What’s In The Box

• 1 × Rlaarlo Omni Terminator RZ001B-C
• 1 × 2.4GHz 6-channel transmitter
• 1 × 3S 2200 mAh LiPo battery
• 1 × charger
• 1 × spare body shell
• 1 × tool kit (cross wrench, hex keys)
• Decal sheets, cable ties, battery straps, spare gear and scarf
• 1 × instruction manual

Full Specifications